Collet ER50 - 27 mm | DIN 6499B - DARMET
PLN86.10 tax incl.
70 tax excl.
Clamping diameter: 27 - 25 mm | DIN 6499B
Properties and applications:
- ER50 collet for cylindrical shank tools.
- The collets fit ER50 collet holders.
- ER nuts are used to wedge and clamp the cage.
- The grooves allow the sleeve to spring back.
- Mounting range: 27,0 - 25,0 mm.
- Use a hook wrench or ER50 multi-point wrench to tighten the clamping nuts.
Technical data:
Parameter | Value |
---|---|
d | 27 mm |
D | 50 mm |
D1 | 52 mm |
D2 | 46 mm |
L | 60 mm |
L1 | 12,6 mm |
L2 | 8,5 mm |
L3 | 5,5 mm |
To properly install the ER collet in the holder, you need to:
- Insert the sleeve at an angle into the nut
- Hook the channel of the sleeve to the eccentric or cylindrical projection of the nut (Figure A)
- Push the sleeve into the nut (fig. B)
- Twist the nut with the pressed sleeve with the holder, so that it is possible to fix the workpiece of the tool
Maximum clamping diameters depending on the type of ER sleeve:
DM_TUL_ER50_27
Polecane produkty
(16 inne produkty z tej samej kategorii)