Properties and applications:

• Heat shrink chuck from the STANDARD DUAL CONTACT line for standard processing with the so-called double contact, that is, in addition to the contact of the cone surface BT 40 is formed contact with the collar of the holder .
• The double contact of the BT 40 taper and the flat surface ensures more accurate and stable clamping.
• Shrink-fit toolholder for holding HSS and solid carbide (VHM) tools with a cylindrical shank with a diameter of 3 mm.
• Shrink-fit holder for holding tools with H6 tolerance cylindrical shank.
• Heat shrink chuck suitable for all induction heat shrink devices.
• Provides runout tolerance up to 0.003 mm (measured at a distance of 3xD from the face of the toolholder).
• Made AD cooling system to allow cooling through the center.
• Along the clamping hole there are slots for coolant supply from the outside.
• The toolholder is precisely balanced for G2.5 - 25000 rpm.
• Permissible toolholder speed reaches 50000 rpm.
• The heated slim tip makes it possible to reach slots of small size.
• Toolholder without threaded holes for balancing with balancing screws.
• Lifetime: 3,000 cycles
• With 1 heating cycle, the tool can be disassembled and reassembled - extending the life of the toolholder

Technical data: