Properties and applications:

• Basic heat shrink chuck with DIN 40 taper is a heat shrink chuck for standard processing.
• The Basic line is most commonly used for machining metals and other materials in the tool diameter range of 6 - 25 mm.
• Heat shrink chuck for clamping HSS and solid carbide (VHM) tools with a cylindrical shank with a diameter of 8 mm.
• Tool holder for holding H6 tolerance cylindrical shank tools.
• Short version of the device, with a length of 80 mm
• Heat shrink chuck suitable for all induction heat shrink devices.
• Provides runout tolerance up to 0.003 mm (measured at a distance of 3xD from the face of the holder).
• Made AD cooling system allowing only central coolant supply via retention knob.
• Precision balanced toolholder for G2.5 - 25000 rpm.
• AT3 taper tolerance
• Heated slim tip allows the tool to reach slots of small size.
• The chuck has no threaded holes, making it impossible to balance the tool with balancing screws.
• All functional surfaces of the holder are precision-machined.
• Lifetime: 3,000 cycles
• With 1 heating cycle, the tool can be disassembled and reassembled - extending the life of the toolholder

Technical data: