2-Position milling machine vise for holding shafts FQV are used on milling machines , grinding machines, drilling machines and CNC machining centers
Two movable jaws press the round-shaped object to the prism and center it
The adjustable sliding rods enable the workpieces to remain set in the same position
The prism is doublesided with the possibility to reinstall
The vise can be positioned on the side surface of the base
Parallelism and squareness of working surfaces: 0,01 - 0,03 mm
When replacing the jaws remachining is necessary
When replacing the jaws, remachining of the working surfaces connected to the vise is necessary in order to acquire accuracy parameters specified in the technical documentation
Specifications:
Parameter
Value
Unit
Jaw width
100
mm
Minimal clamp diameter
Ø10
mm
Maximal clamp diameter
Ø80
mm
Keyway width
14
mm
Clamping force
2000
daN
Weight
21
kg
Accuracy parameters:
Accuracy of the contact of movable jaws with the reference cylinder surface positioned on the vise prism - 0,01 mm
Parallelism of reference cylinder clasped on the vise in relation to the primary support surface - 0,03/100 mm
Parallelism of intersection line of working surfaces in relation to the primary support surface - 0,03/100 mm
Perpendicularity between the primary support surfaces - 0,05 mm