2-ostrzowy 5 mm | kulisty frez czołowy | uniwersalny do 45 HRC | pełnowęglikowy VHM - 23214050

31,39 zł z VAT

25.52 netto

Średnica: 5 mm | Materiał: VHM | Do obróbki materiałów o twardości do 45 HRC | Liczba ostrzy: 2

Opis
Szczegóły produktu

Właściwości i zastosowanie:

Frez pełnowęglikowy (VHM) zaokrąglony, z kulistą powierzchnią czołową, uniwersalny, średnica 5 mm, do obróbki ogólnej.
Frezy z serii General są idealne do obróbki stali o twardości do 45 HRC.
2 ostrza z węglików spiekanych zapewniają lepsze odprowadzanie wirów niż w przypadku frezów z 4 ostrzami.
Kąt linii śrubowej rowków wiórowych wynosi 35º.
Powłoka AlTiN.
Frezy z węglików spiekanych mogą być mocowane w uchwytach zaciskowych ER, uchwytach frezarskich Weldon, uchwytach termokurczliwych.

Dane techniczne:

Frez 2-ostrzowy pełnowęglikowy VHM z czołem kulistym - wymiary

d₁ [mm]	5
d₂ [mm]	5
l₂ [mm]	13
l₁ [mm]	50
R [mm]	2,5
z (Liczba ostrzy)	2
Numer katalogowy	23214050

Indeks INT_23214050

Related products

(16 other products in the same category)

6-Flute Roughing End Mill, Long DIN844-A L-M-NR, HSS-E - 26MM - FENES

6-Flute Roughing End Mill, Long DIN844-A L-M-NR, HSS-E - 26MM - FENES

PLN432.74

351.82 tax excl.

Material: HSS-E;
Standard: 844-A L-M-NR;
Number of flutes: 6;
Diameter: 26 mm

2-Flute End Mill for general machining, short DIN6527-K, VHM TiAlN - 4MM - FENES

2-Flute End Mill for general machining, short DIN6527-K, VHM TiAlN - 4MM - FENES

PLN69.00

56.1 tax excl.

Material: VHM;
Coating: TiAlN;
Standard: 6527-K;
Number of flutes: 2;
Diameter: 4 mm

4-Flute End Mill for General Machining, Long DIN844-A L-N, HSS - 6,5MM - FENES

4-Flute End Mill for General Machining, Long DIN844-A L-N, HSS - 6,5MM - FENES

PLN45.79

37.23 tax excl.

Material: HSS;
Standard: 844-A L-N;
Number of flutes: 4;
Diameter: 6,5 mm

4-Flute End Mill for general machining, short DIN6527-K, VHM TiAlN - 10MM - FENES

4-Flute End Mill for general machining, short DIN6527-K, VHM TiAlN - 10MM - FENES

PLN160.49

130.48 tax excl.

Material: VHM;
Coating: TiAlN;
Standard: 6527-K;
Number of flutes: 4;
Diameter: 10 mm

4-Flute End Mill for general machining, short DIN6527-K, VHM TiAlN - 8MM - FENES

4-Flute End Mill for general machining, short DIN6527-K, VHM TiAlN - 8MM - FENES

PLN90.86

73.87 tax excl.

Material: VHM;
Coating: TiAlN;
Standard: 6527-K;
Number of flutes: 4;
Diameter: 8 mm

6-Flute End Mill for General Machining with a MT4 Morse Taper Shank, Long DIN845-B L-N, HSS - 32MM - FENES

6-Flute End Mill for General Machining with a MT4 Morse Taper Shank, Long DIN845-B L-N, HSS...

PLN281.14

228.57 tax excl.

Material: HSS;
Standard: 845-B L-N;
Number of flutes: 6;
Diameter: 32 mm;
Shank size: MT4

4-Flute End Mill for general machining, long DIN6527-L, VHM TiAlN - 10MM - FENES

4-Flute End Mill for general machining, long DIN6527-L, VHM TiAlN - 10MM - FENES

PLN176.59

143.57 tax excl.

Material: VHM;
Coating: TiAlN;
Standard: 6527-L;
Number of flutes: 4;
Diameter: 10 mm

Single Flute End Mill for aluminium and PVC machining, NFPo, HSS-E - 8x40x100MM - FENES

Single Flute End Mill for aluminium and PVC machining, NFPo, HSS-E - 8x40x100MM - FENES

PLN78.41

63.75 tax excl.

Material: HSS-E;
Standard: NFPo;
Number of flutes: 1;
Diameter: 8 mm

6-Flute Roughing End Mill, Short DIN844-A K-M-NR, HSS-E - 32MM - FENES

6-Flute Roughing End Mill, Short DIN844-A K-M-NR, HSS-E - 32MM - FENES

PLN437.44

355.64 tax excl.

Material: HSS-E;
Standard: 844-A K-M-NR;
Number of flutes: 6;
Diameter: 32 mm

4-Flute End Mill for General Machining with a MT2 Morse Taper Shank, Long DIN845-B L-N, HSS - 19MM - FENES

4-Flute End Mill for General Machining with a MT2 Morse Taper Shank, Long DIN845-B L-N, HSS...

PLN154.52

125.63 tax excl.

Material: HSS;
Standard: 845-B L-N;
Number of flutes: 4;
Diameter: 19 mm;
Shank size: MT2

4-Flute Centercutting End Mill, Long DIN844-A L-M-N, HSS - 3MM - FENES

4-Flute Centercutting End Mill, Long DIN844-A L-M-N, HSS - 3MM - FENES

PLN36.29

29.5 tax excl.

Material: HSS;
Standard: 844-A L-M-N;
Number of flutes: 4;
Diameter: 3 mm

4-Flute End Mill for General Machining, Short DIN844-A K-N, HSS - 3,5MM - FENES

4-Flute End Mill for General Machining, Short DIN844-A K-N, HSS - 3,5MM - FENES

PLN35.24

28.65 tax excl.

Material: HSS;
Standard: 844-A K-N;
Number of flutes: 4;
Diameter: 3,5 mm

Solid carbide cutter | 6 mm | 4-cutter Z4 - HAIMER (F2004NNH0600CDA)

PLN109.84

89.3 tax excl.

Diameter: 6 mm; Working length: 13 mm; Number of blades: 4

2-Flute Ball Nose End Mill, short with cylindrical shank, DIN327-B KR, HSS - 5MM - FENES

2-Flute Ball Nose End Mill, short with cylindrical shank, DIN327-B KR, HSS - 5MM - FENES

PLN45.69

37.15 tax excl.

Material: HSS;
Standard: DIN327-B KR;
Number of flutes: 2;
Diameter: 5 mm;
Length of cut: 8 mm

Single Flute End Mill for aluminium and PVC machining, NFPo, HSS-E - 5x16x100MM - FENES

Single Flute End Mill for aluminium and PVC machining, NFPo, HSS-E - 5x16x100MM - FENES

PLN64.40

52.36 tax excl.

Material: HSS-E;
Standard: NFPo;
Number of flutes: 1;
Diameter: 5 mm

4-Flute End Mill for General Machining, Long DIN844-A L-N, HSS-E - 12MM - FENES

4-Flute End Mill for General Machining, Long DIN844-A L-N, HSS-E - 12MM - FENES

PLN74.55

60.61 tax excl.

Material: HSS-E;
Standard: 844-A L-N;
Number of flutes: 4;
Diameter: 12 mm