English
Polski
ER40 Collet Nut, type 9833
PLN71.09 tax incl.
57.8 tax excl.
For use with ER collet chucks
Properties and application:
- Made of high-quality steel.
- Designed for collet chucks used with ER collets DIN 6499.
- Before mounting in a chuck, the collet has to be mounted in the nut.
Specifications:
| Parameter | Value | Unit |
|---|---|---|
| D | 63 | mm |
| L | 25,5 | mm |
| M | M50 x 1,5 | mm |
| Weight | 0,3 | kg |
Installing collet in the nut:
For proper mounting of ER collet follow these steps:
- Put the collet into the nut at a slight angle.
- Hook the groove of the collet on eccentric or cylindrical edge of the collet (fig. A).
- Jam the collet into the nut (fig. B).
- Screw the nut with collet on the toolholder, so that mounting of the machined tool is possible.
- Fig. C shows how to remove the collet.
ZMK_0642-198-330-500
Data sheet
- Accessory type
- ER collet nut
Related products
(16 other products in the same category)
For use with ER collet chucks