English
Polski
Collet ER16 - 9MM DARMET
PLN34.44 tax incl.
28 tax excl.
Clamping range: 9 - 8,1 mm
DIN6499B
Properties and application:
- ER collet for tools with a cylindrical shank
- Possible mounting range burned out on the collet
- Universal collet for every standard ER nut
- Grooves allow the collet to spring back, which enables mounting of tools in 9 - 8,1 mm range
- Face of the collet is flat to ensure maximum access of the mounted tool's working part to the workpiece
Specifications:
| Parameter | Value | Unit |
|---|---|---|
| d | 9 | mm |
| D | 16 | mm |
| D1 | 17 | mm |
| D2 | 13,8 | mm |
| L | 27,5 | mm |
| L1 | 6,26 | mm |
| L2 | 4,0 | mm |
| L3 | 2,7 | mm |
Mounting the collet in the nut:
Mounting the collet in the nut
Properly mounted collet
Dismounting the collet
For proper mounting of ER collet follow these steps:
- Put the collet into the nut at a slight angle
- Hook the groove of the collet on ecentric or cylindrical edge of the collet (fig. A)
- Jam the collet into the nut (fig. B)
- Screw the nut with the collet inside into the toolholder, so that mounting of the machined tool is possible
ER Standards:
| ER | d1 [mm] | Clamping range [mm] | d2 [mm] | d3 [mm] | aAT3 | l1 [mm] | l13 max [mm] |
|---|---|---|---|---|---|---|---|
| ER11 | 1÷7 | 0,5 | 11 | 11,5 | 8° | 18,0 | 6,6 |
| ER16 | 1÷10 | 0,5÷1 | 16 | 17,0 | 8° | 27,5 | 10,6 |
| ER20 | 1÷13 | 0,5÷1 | 20 | 21,0 | 8° | 31,5 | 11,5 |
| ER25 | 1÷16 | 0,5÷1 | 25 | 26,0 | 8° | 34,0 | 12 |
| ER32 | 1÷20 | 0,5÷1 | 32 | 33,0 | 8° | 40,0 | 13 |
| ER40 | 1÷30 | 1 | 40 | 41,0 | 8° | 46,0 | 15 |
Maximum mounting diameters in relation to the ER collet type:
DM_TUL_ER16_09
Data sheet
- Collet opening
- round
- Collet size
- 9 mm
- Collet series
- ER16
Related products
(16 other products in the same category)
Clamping range: 9 - 8,1 mm
DIN6499B